Product Line — Oak Superior

A 4 mm oak face on a 7½-inch ply-core plank.

An engineered European oak plank from BuildDirect’s core hardwood program: 7.5-inch boards, a 4 mm wear layer and two stocked colorways, FloorScore certified.

Oak Superior engineered hardwood, Taupe colorway
Taupe Oak Superior — BuildDirect product photography.
7.5″
PLANK WIDTH
4 mm
REAL-WOOD WEAR LAYER
2
COLORWAYS
5-Year
COMMERCIAL WARRANTY

01 — Color & Sampling

Two colorways, one board.

Every Oak Superior colorway runs on the same 7.5-inch engineered board. Wood is a natural material and screen color is indicative only — judge it against a full-size sample before documents close.

Oak Superior colorway TaupeTAUPE 15274460
Oak Superior colorway MarcelMARCEL 15274461
The palette

Oak Superior’s current colorways with BuildDirect SKU numbers.

Oak Superior Marcel colorway at plank scale
Marcel

The Marcel colorway at plank scale.

Sampling

Full planks, not chips.

Full-size Oak Superior boards in the actual colorways, delivered by your account executive before documents close.

02 — The Build

Real wood on an engineered core.

Oak Superior is 0.59″ thick, with a 4 mm European oak wear layer, micro bevel edges and a tongue & groove profile. It arrives prefinished — no site sanding, no cure time.

01

Ply-core build

Engineered construction on a ply-core under a real European oak face — more dimensionally stable than solid wood across wide runs.

02

4 mm wear layer

A 4 mm real-wood wear layer, prefinished: urethane, low-gloss, wirebrushed.

03

FloorScore certified

Certified to FloorScore for indoor air quality.

04

Warranted

25-year residential; 5-year commercial warranty, as published by BuildDirect.

BuildDirect Core Collection

7.5-inch European oak, specified and supplied through Yorkshore.

03 — Specification

The numbers, on the page.

Attributes as published by BuildDirect for the Oak Superior collection. Confirm against the current product sheet from your account executive before it goes into a specification.

Specify

BuildDirect’s published attributes for Oak Superior.

AttributeValue
ConstructionEngineered, Ply-Core
SpeciesEuropean Oak, White Oak, Oak
Wear layer4.0 mm
Thickness0.59″
Width7.5″
Length23.62″ – 75.19″ (avg 59.0″)
FinishUrethane, low-gloss; wirebrushed surface
EdgeMicro Bevel
Profile / installTongue & Groove
Radiant heatElectric And Hydronic Heat
CertificationFloorScore
Warranty25-year residential; 5-year commercial
Application (as listed)Residential

All hardwood lines →Order samples

Start a Project

Every project starts with a conversation.

One dedicated account executive carries your project from first sample to final walkthrough — one contact, start to finish.