Schönox SL
Cement-based rapid-drying smoothing compound, featheredge to 6 mm, ready for covering in about 20 minutes, EC1 PLUS R
Floor Prep
Schönox HPS 92
Acrylic adhesive for VCT, SVT, LVT and plank, rated to 99% RH (92% under sheet goods) and pH 12
Performance at a glance
- Construction
- Acrylic adhesive
- Installation
- Adhesive applied under VCT, vinyl-enhanced tile, solid vinyl tile, LVT and plank
Availability and lead times are confirmed by your Yorkshore representative.
Overview
Schönox HPS 92 is the acrylic adhesive that closes the Schönox system, bonding VCT, vinyl-enhanced tile, solid vinyl tile, LVT and planks to suitable interior substrates once they have been smoothed and leveled. Yorkshore lists it for slabs reading up to 99% relative humidity, or 92% RH under sheet goods, and a surface pH of 12, the moisture and alkalinity limits that decide whether a wet-slab installation can proceed without separate mitigation.
HPS 92 sits at the end of the four-step bench shown on yorkshore.com: smooth with SL, level with ZM, reinforce with APF, bond with HPS 92. The technical data sheet with coverage, open time and working time was not published on yorkshore.com at the time of writing; your account executive supplies the current sheet with the system recommendation. Covered by the Schönox system warranty.
Specifications
| Property | Value |
|---|---|
| Construction and format | |
| Construction | Acrylic adhesive |
| Installation | Adhesive applied under VCT, vinyl-enhanced tile, solid vinyl tile, LVT and plank |
| Performance and specification data | |
| Type | Acrylic adhesive for resilient tile and plank |
| Coverings | VCT, vinyl-enhanced tile, solid vinyl tile, LVT and planks on suitable interior substrates |
| Moisture tolerance | 99% RH; 92% RH under sheet goods |
| pH tolerance | 12 |
Documents and certifications
-
Schönox — System warranty
-
Schönox — Healthcare floor covering systems
Related products and installation materials
-
-
Schönox ZM
Very low emission, low-shrinkage cementitious self-leveler for all suitable substrates, 1 to 15 mm, A1fl
-
Schönox APF
Fibre-reinforced synthetic gypsum self-leveler for wood and critical substrates, 3 to 15 mm, no reinforcing mat
-
EnviroSTIX Classic
Pre-applied peel-and-bond adhesive on the flooring backing, 0 g/L VOC, rated to 96% RH with ES-P primer, 10-year limited warranty
-
ES-2-GO
Mobile applicator lays pre-cured adhesive tape onto flooring on site, 0 g/L VOC, immediate foot traffic
Need help specifying this product?
Share your project details and we’ll recommend suitable products, documents and samples.