ABMarathon Hammered Rubber Tile
Homogeneous rubber tile with a shallow hammered texture, 3 mm, 18 in format, nine colorways

Homogeneous rubber tile with a raised disc surface, 3 mm, in 18 in and 36 in formats and 23 colorways
Availability and lead times are confirmed by your Yorkshore representative.
ABMarathon Round is American Biltrite's homogeneous vulcanized rubber tile with a raised disc surface. The color runs through the full 3 mm body of the tile, so wear reveals the same color underneath rather than a printed film. The studs lift the contact patch clear of water and grit, and the Micro Ground finish leaves the surface flat enough to mop without building a polish line.
Round is the one ABMarathon surface made in both formats, 18" × 18" and 36" × 36", and carries the largest palette of the three surfaces: 23 colorways, from the four grays that carry most corridors to saturated reds, oranges, greens and blues that read as wayfinding rather than decoration.
American Biltrite publishes a product-specific EPD, a Declare Red List Free label and FloorScore certification for ABMarathon, and backs the tile with a 10-year limited wear warranty. Matching stair treads are made in the same compound.
Suitability depends on configuration, substrate, installation and maintenance. Confirm project-specific requirements with a specialist.
Select a color to view it larger.
| Property | Value | Test method |
|---|---|---|
| Construction and format | ||
| Construction | Homogeneous vulcanized rubber tile, 3 mm, color through the full thickness, Micro Ground finish | — |
| Formats | Tile 18 x 18 in (nominal); Tile 36 x 36 in (nominal) | — |
| Installation | Glue-down | — |
| Performance and specification data | ||
| Surface design | Round (raised disc), MCR | — |
| Construction | Homogeneous vulcanized rubber tile, color through the full thickness | — |
| Classification | Rubber tile Type I, A or B (homogeneous) | ASTM F1344 |
| Gauge | 3 mm0.118 in | — |
| Surface finish | Micro Ground | — |
| Tile sizes | 18 x 18 in and 36 x 36 in (nominal) 452 x 452 mm (17.798 in) and 906 x 906 mm (35.687 in) | — |
| Colorways | 23 colorways | — |
| Static coefficient of friction | ≥ 0.5 | ASTM D2047 |
| Critical radiant flux | ≥ 0.45 W/cm² | ASTM E648 |
| Smoke density | 450 | ASTM E662 |
| Static load | ≤ 0.005 in | ASTM F970 |
| Abrasion resistance | Pass H-18 wheel, 500 g, 1,000 cycles | ASTM D3389 |
| Chemical resistance | Meets requirements | ASTM F925 |
| Heat stability | ΔE ≤ 8.0 | ASTM F1514 |
| Microbial growth | Does not support growth at 28 days Without the use of antimicrobial chemicals | ASTM G21 |
| Indoor air quality | FloorScore certified, SCS-FS-01492 | — |
| Environmental | Product-specific EPD (2025–2030); Declare Red List Free | — |
| Warranty | 10-year limited wear warranty | — |
| Made in | North America | — |
ABMarathon rubber tile — Technical specifications
ABMarathon rubber tile — Architectural specifications
ABMarathon rubber tile — Installation instructions
ABMarathon rubber tile — Maintenance instructions
ABMarathon — Warranty
ABMarathon — LEED v4 compliance
Share your project details and we’ll recommend suitable products, documents and samples.