Manufacturer

Base King

EnviroSTIX peel-and-bond adhesive systems from Base King: a poly-acrylic adhesive machine-applied to the backing of carpet tile, LVT, sheet and rubber before it reaches the site, with ES-100 for high-humidity slabs, ES-2-GO on-site application and ES-Cushion and ES-Barrier layers.

Request a Quote
Base King EnviroSTIX peel-and-bond installation in three steps

About Base King

Base King makes EnviroSTIX, a poly-acrylic adhesive applied by machine to the backing of commercial flooring before it reaches the site, so installation is peel, place and roll with no open trowels, flash time or adhesive odor. EnviroSTIX Classic has been in the field for more than ten years, with installation instructions published for carpet tile, LVT plank, sheet goods and rubber tile. ES-100 adds a moisture-barrier primer for slabs holding high relative humidity. ES-2-GO applies adhesive from rolls through a purpose-built machine on site. ES-Cushion and ES-Barrier are pre-cured adhesive systems that add acoustic and impact performance or moisture protection as they bond. Specification guides, installation instructions, safety data sheets and warranties are published for each system.

Manufacturer website

Manufacturer
Base King
Lines represented
EnviroSTIX Classic, ES-100, ES-2-GO, ES-Cushion, ES-Barrier
Categories
Floor Prep
Represented by Yorkshore

Product lines

  • Flooring backings with EnviroSTIX adhesive pre-applied at the factory

    Floor Prep

    EnviroSTIX Classic

    Pre-applied peel-and-bond adhesive on the flooring backing, 0 g/L VOC, rated to 96% RH with ES-P primer, 10-year limited warranty

    • Adhesive thickness 5–7 mil
    • Warranty 10-year limited
  • Flooring backings with EnviroSTIX adhesive pre-applied at the factory

    Floor Prep

    ES-100

    Pre-applied adhesive with ES-MBP moisture barrier primer for slabs up to 100% RH, no pH limit, immediate access

    • Adhesive thickness 5–7 mil
    • Warranty 10-year limited (system bought together from Base King with project name on the PO)
  • Base King ES-2-GO mobile adhesive applicator

    Floor Prep

    ES-2-GO

    Mobile applicator lays pre-cured adhesive tape onto flooring on site, 0 g/L VOC, immediate foot traffic

    • Warranty 5-year limited system warranty with bond test and full application instructions; tape 90 days against manufacturing defects
  • Base King ES-Cushion acoustic underlayment with EnviroSTIX adhesive

    Floor Prep

    ES-Cushion

    Synthetic rubber carpet-tile cushion with EnviroSTIX adhesive pre-applied: IIC 65, STC 52, extra-heavy traffic

    • Compression load deflection min. 7 psi at 25%; min. 45 psi at 65% (ASTM D2646)
    • Thickness 0.156 in
    • Warranty 10-year limited
  • Base King ES-Barrier moisture barrier adhesive sheet

    Floor Prep

    ES-Barrier

    High-density rubber moisture and acoustic sheet with EnviroSTIX adhesive, rated to 99% RH, IIC 66, STC 63

    • Thickness 0.056 in (1.42 mm); 1.47 mm single-sided adhesive, 1.52 mm double-sided
Technical resources

Manufacturer documents

Search the technical library

Talk to a Yorkshore specialist

Share your project details and we’ll recommend suitable products, documents and samples.

Request a QuoteRequest samples